The anode rod inside a traditional tank-style water heater is designed to corrode so the steel tank does not. As the rod wears away, it gradually loses its ability to protect the tank, which can eventually lead to rust and tank failure.
Because the anode rod is hidden inside the water heater, you usually cannot tell that it is bad just by looking at the outside of the tank. There are, however, several warning signs that can suggest it is time to have the rod inspected.
Rusty or discolored hot water
Rust-colored or brown hot water can be a sign that corrosion is developing inside the tank. If the discoloration appears only when you use hot water, the water heater is more likely to be the source.
A worn-out anode rod is one possible cause because once the rod is depleted, the steel tank has less protection against corrosion.
A rotten-egg smell from the hot water
Some water heaters develop a sulfur or rotten-egg odor caused by bacteria reacting with the anode rod and compounds in the water. This does not always mean the rod has failed, but it can indicate that the rod is involved in the problem.
The correct solution depends on the type of anode rod, water chemistry and condition of the tank, so replacing the rod blindly is not always the best approach.
The water heater is getting older
Anode rods are wear items and do not last forever. Their lifespan varies depending on water quality, water usage and the type of rod installed.
If your tank-style water heater is several years old and the anode rod has never been inspected, it may be worth checking before corrosion has a chance to damage the tank itself.
The rod is heavily corroded or mostly gone
The most reliable way to determine the condition of an anode rod is to remove and inspect it. A healthy rod still has a substantial amount of metal remaining around its steel core.
If most of the sacrificial metal has dissolved, the rod is heavily pitted or the steel core is exposed, replacement is usually appropriate.
Why replacing the anode rod matters
Replacing a worn anode rod can help extend the life of a tank-style water heater by continuing to protect the steel tank from corrosion. Once the tank itself rusts through and begins leaking, replacing the anode rod will not repair it.
That is why inspecting the rod before the tank develops corrosion can be worthwhile, especially if the water heater is otherwise in good condition.
Does a tankless water heater have an anode rod?
Tankless water heaters do not normally use the same sacrificial anode rod found in traditional storage-tank water heaters. Their maintenance needs are different and usually focus more on descaling, water quality and cleaning the heat exchanger.
If you have a tankless system, an anode rod is generally not part of the maintenance routine.
Need help checking your water heater’s anode rod?
Roberts Brothers Comfort can inspect your tank-style water heater, check the condition of the anode rod and determine whether replacement or other maintenance is needed. Call us at 937-909-3663 for help with your water heater or any indoor plumbing problem. We service homes across the area from both our Piqua and St. Paris offices.
