A water heater bursting is not especially common, but it can happen, particularly with an older or badly corroded tank.
Most water heaters do not suddenly explode without warning. More often, the tank begins to weaken over time because of corrosion, excessive pressure, sediment buildup or failure of an important safety component. In many cases, there are warning signs before a serious leak or rupture occurs.
Why would a water heater burst?
One of the most common causes is corrosion inside the tank. Tank-style water heaters contain an anode rod that helps protect the steel tank from rusting. As the water heater ages, that rod gradually deteriorates. Eventually, corrosion can begin attacking the tank itself. Once the tank wall becomes weak enough, it can begin leaking or fail more dramatically.
Excessive pressure can also be a problem
Water expands as it heats. Normally, your plumbing system and the water heater’s safety controls manage that pressure. If pressure inside the tank becomes excessive, the temperature and pressure relief valve, commonly called the T&P valve, is designed to release it. A malfunctioning or blocked relief valve can create a much more serious situation. Never plug, cap or disable a leaking T&P valve. If it is releasing water repeatedly, the cause should be investigated.
Sediment can contribute to tank damage
Minerals can settle at the bottom of a water heater and create a layer of sediment. Heavy sediment buildup can make the water heater work harder and can cause popping or rumbling noises as the water heats. Over time, that extra heat and stress can contribute to wear on the tank.
Sediment alone does not mean the tank is about to burst, but it can be one factor that shortens the life of the water heater.
Are there warning signs before a water heater fails?
Often, yes. Watch for:
- Water collecting around the bottom of the tank
- Rust or corrosion on the tank or fittings
- Rusty or discolored hot water
- Popping or rumbling noises
- Water leaking from fittings or valves
- A T&P valve that repeatedly releases water
- A noticeable decline in hot water performance
A small leak around an older tank can turn into a much larger one, so it is best not to wait until water is covering the floor.
What should you do if the tank starts leaking badly?
If a water heater suddenly begins releasing a large amount of water, shut off the water supply to the tank if you can do so safely. For an electric water heater, power should also be shut off at the breaker. For a gas water heater, follow the manufacturer’s shutdown instructions or contact a professional if you are unsure how to shut it down safely. Then arrange for service as soon as possible.
Should an old water heater be replaced before it bursts?
Not every older water heater needs immediate replacement, but age becomes increasingly important when the tank begins showing signs of corrosion or leakage. A leaking tank itself generally cannot be repaired. Once the steel tank has corroded through, replacement is usually the practical solution.
Worried about your water heater bursting?
A catastrophic water heater rupture is uncommon, but leaking, corrosion, excessive pressure and other warning signs should not be ignored. Roberts Brothers Comfort can inspect your hot water tank, determine whether it can be repaired safely and let you know when replacement is the better option. Call us at 937-909-3663 for help with your water heater or any indoor plumbing problem. We service homes across the area from both our Piqua and St. Paris offices.
